Keeper (Part Number:KU35032)
|You Save:||17% ($64.96)|
The KU3.5 is a High Performance, Fully Loaded Utility Winch Ideal for Car and Utility Trailers, and Recovery Anywhere a Flat Strong Surface is Available for Mounting. 1.2 HP Permanent Magnet 12V DC Motor, Automatic Full Load Holding Brake, 60’L x 7/32” Dia. Galvanized Wire Rope With Clevis Hook and Safety Latch, Galvanized Wire Rope Retaining Spring, Cam Activated Free-Spool Clutch, 3 Stage Full Metal Planetary Gear Train, Case Hardened Gears, Heavy-Duty Mounting Plate and Roller Fairlead, Integrated Heavy Duty Sealed Solenoid Switching, Hand Held Pendant Switch on 15’ Lead with Integrated LED High Density Work Light. 12,000lb. Pulley Block,Power In / Power Out. 3,500 lbs. of Pulling Power (Single Line Rated).
|Line Pull||3,500 lbs.|
|Motor||12V DC 1.2hp|
|Cable Material||Aircraft grade galvanized wire rope|
|Cable Length||7/32" x 60 ft|
|Line Speed||22 FPM @ no load|
|Motor Amp Draw||140|
|Mounting Bolt Pattern||2.5" x 3.0"|
|Installation Instructions||CLICK HERE|
For 28 years, Keeper has stretched the limits of our category, continually met the demands of a changing market place, improved cargo handling and helped mold the way the world transports cargo.
Keeper developed its Hi-Test™ webbing many years ago using 3 layers of high tenacity yarn to protect and provide strength. The face, back and edge layers provide the webbing with abrasion and weather protection and the center, or warp yarns, provide the strength. All Hi-Test webbing is tested for abrasion resistance using Federal Test Method #5309, required of all mil-spec webbing. The webbing is cycled over a steel hexagonal bar to simulate real life application. A tensile test is then conducted. All Keeper webbing passes an abrasion capacity requirement so you are assured of a long lasting product.
The above information has been provided by the Manufacturer, and we cannot guarantee the accuracy thereof or endorse the opinions expressed.